Free Web Hosting Provider - Web Hosting - E-commerce - High Speed Internet - Free Web Page
Search the Web

Siemens

Home Motorola Siemens Ericsson Nokia Nokia tones

سيمينس

S1/S3

 

Tetris: Power on phone and enter PIN. before phone has locked onto network, F9, send own number, hit right button, hit 9. left is 2, right is 8, rotate is 5, and drop is 4.

Monitor Mode: Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left MENU key), 5553756, HangUp Button (Red HandSet key)

Now "Monitor" should appear at the bottom of the Network Options menu.

Pressing the right Display Button when in monitor mode will show a list of the six cells with the strongest signals.


Test Mode Indicators:   
* = only available when call in progress )

CH	Channel Number
RX	Signal Strength (dB)
N	NCC (Color Code)
B	BCC (Color Code)
CI	Cell ID (in Hex)
C1+	how long before phone does forced hand over. 
	(see RX and RXAM)
LAI	Location Area Identity. 
	Display Network ID code (42F010 = 240.01)
        and MSC
TXPWR	Transmit Power (dB)
RXAM	Reeceive signal strength cut-off point
TS*	Time Slot Number
TA*	Timing Advance. Distance from tower in Km X 2
PL*	Power Level

Power Table
PL:	5  6     7    8    9   10    11   12   13 14  15
dB:	33 31    29   27   25   23    21   19   17 15  13
Watts:  2  1.3   .8   .5   .3   .2   .13  .08  .05 .03  .02

LF* C1 value with continuous transmisson from tower
LS* C1 Value with discontinuous tranmission from tower
QF* Bit Error Rate with continuous transmission from tower
QS* Bit Error Rate with discontinuous transmission from tower
 
BER (bit error rate) table
QF/QS register:  0     1     2     3     4     5   6    7
% of bit sent:	0.2   0.8   0.4   1.6   3.2   6.4 12.8 25.6

S3:comfort
MONITOR MODE
The Siemens S3 Com series have a Monitor mode that can be activated directly from the standard user keypad. In order to activate this mode, you must enter the special access code currently programmed into the phone.
TO ACTIVATE MONITOR MODE:
  1. Turn the phone on.
  2. Enter the PIN access code on press OK. (Only if is enabled).
  3. Press Menu. (Left top button).
  4. Press 9. (Phone Options).
  5. Press 8. (Phone Status) (May be button 7 in some phones).
    You may see your IMEI Number
  6. Left Display Button (Top left MENU key).
  7. 7684666
  8. HangUp Button. (Red HandSet key).
Note: Monitor should appear now at the bottom of the Network Options menu.
MONITOR MODE
Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes

Siemens S4/S4 Power  & Sony CM DX 100
MONITOR MODE
The Siemens S4 series have a Monitor mode that can be activated directly from the standard user keypad. In order to activate this mode, you must enter the special access code currently programmed into the phone.
TO ACTIVATE MONITOR MODE:
Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left MENU key), 7684666, HangUp Button (Red HandSet key)
Now "Monitor" should appear at the bottom of the Network Options menu.
Pressing the right Display Button when in monitor mode will show a list of the six cells with the strongest signals.